7-17
INSPECTION AND MAINTENANCE
80SS5-01E
• Class 1: K12C engine with SHVS
• Class 2: K12C engine without SHVS
• Class 3: K12M engine
#1: Valve clearance for K12C engine model is not required for maintenance.
#2: Perform the engine coolant level check under the daily inspection in the “OPERATING YOUR VEHICLE” section.
If you use the engine coolant other than “SUZUKI LLC: Super (Blue)” for replacement, follow the schedule of “SUZUKI LLC: Stan-
dard (Green)”. (Replace every 45000 km (27000 miles) or 36 months.)
Interval: This interval should be judged by
odometer reading or months, whichever comes
first.
km (x1000) 15 30 45 60 75 90
miles (x1000) 9 18 27 36 45 54
months 12 24 36 48 60 72
ENGINE
*1-1. Engine accessory drive belt [Class 1] Tension check, *Adjustment, *Replacement I I I I R I
[Class2, 3] Tension check, *Adjustment, *Replacement – – I – – R
*1-2. Valve clearance [Class 3] (#1) – I – I – I
1-3. Engine oil and engine oil filter R R R R R R
1-4. Engine coolant SUZUKI LLC: Super (Blue) (#2)
First time only: Replace at 150000 km (90000 miles) or 96 months.
Second time and after: Replace every 75000 km (45000 miles) or 48 months.
SUZUKI LLC: Standard (Green) – – R – – R
*1-5. Exhaust system (except catalyst) – I – I – I
IGNITION
2-1. Spark plugs [Class 1, 2] Iridium plug Replace every 105000 km (63000 miles) or 84 months.
[Class 3] Nickel plug – – R – – R
FUEL
3-1. Air cleaner filter element Paved-road I I R I I R
Dusty condition Refer to “Severe driving condition” schedule.
*3-2. Fuel lines –I–I–I
*3-3. Fuel filter Replace every 105000 km (63000 miles).
*3-4. Fuel tank –– I –– I
EMISSION CONTROL SYSTEM
*4-1. PCV valve ––––– I
*4-2.
Fuel evaporative emission control system
– – – – – I
To Next Page
Loading...
Need help?
General
