Suzuki SWIFT 2022 Series User Manual

2-78
BEFORE DRIVING
80SS5-01E
52RS20420
When the ignition switch is turned to “ON”
position or the engine switch is pressed to
change the ignition mode to ON, the mes-
sage shown in the above illustration will
appear on the display for several seconds.
Some warning and indicator messages
may appear on the display when the igni-
tion switch is in “ACC” or “LOCK” position,
or the ignition mode is ACC or LOCK
(OFF).
Clock
When the ignition switch is in “ON” position
or the ignition mode is ON, the display (A)
shows the time.
To set the clock, follow “Setting mode”
instructions in this section.
Thermometer (if equipped)
When the ignition switch is in “ON” position
or the ignition mode is ON, the display (B)
shows the thermometer.
The thermometer indicates the outside
temperature.
52RM20870
If the outside temperature nears freezing
condition, the mark (a) will appear on the
display.
NOTE:
• The outside temperature indication is not
the actual outside temperature when
driving at low speed, or when stopped.
• If there is something wrong with the ther-
mometer, or just after the ignition switch
is turned to “ON” position or the engine
switch is pressed to change the ignition
mode to ON, the display may not indi-
cate the outside temperature.
WARNING
If you attempt to adjust the display
while driving, you could lose control
of the vehicle.
Do not attempt to adjust the display
while driving.
(a)
EXAMPLE

Suzuki SWIFT 2022 Series Specifications

General

Brand	Suzuki
Model	SWIFT 2022 Series
Category	Automobile
Language	English