2-51
Instrument panel light brightness 2
Set the meter to instrument panel light
brightness. Pushing the select switch
(Up) will change the instrument panel
light brightness in 6 steps. The bright-
ness indicator indicates brightness from
“ ” (min) to “ ” (max).
NOTE: When the MODE switch is
pressed while adjusting instrument
panel light brightness, the screen
moves to drive mode selection; there-
fore, the instrument panel light bright-
ness can no longer be adjusted. In this
case, press the MODE switch again to
cancel the drive mode selection, and
then the instrument panel light bright-
ness can be adjusted.
To Next Page
Loading...
