3-82
FRONT WHEEL
REMOVING
1. Place the motorcycle on the side
stand. (V-STROM 1050)
Place the motorcycle on the center
stand. (V-STROM 1050XT)
2. Remove the front wheel speed sen-
sor by removing the mounting bolt
1.
3. Remove both brake calipers from
the front forks by removing the
mounting bolts
2 on each of the cal-
ipers.
NOTE: Never squeeze the brake lever
with the caliper removed. It is very diffi-
cult to force the pads back into the cali-
per assembly and brake fluid leakage
may result.
To Next Page
Loading...
