2-54
5. Press the select switch (Down) for
about 2 seconds. The arrow marks
( , ) above and below the indica-
tion disappear and the setting is
confirmed before returning to the
setting screen.
NOTE:
• When the select switch (Up) is
pressed for about 2 seconds while
setting, the setting is terminated and
the screen returns to the “MENU”
indication.
• The setting is also terminated when
the ignition switch is turned OFF
while setting or the switch is not
operated for 10 seconds. In this
case, the setting at the time of termi-
nation is adopted.
• The year can be set from 2019 to
2099.
• When the battery terminals are dis-
connected and reconnected, the
date and time are reset. In such
case, set them again.
To Next Page
Loading...
