2-56
2. By pressing the select switch (Up or
Down), the arrow indicating the
selection moves and the selected
item is highlighted.
NOTE: When “OFF” is selected in the
“MODE” setting, “MAIN” and “BRIGHT”
cannot be selected. In this case, select
LIGHT “ ” or BLINK “ ” in the
“MODE” setting. (
2-57)
The setting screen has the following
items 1 to 3.
1.MODE
Set the lighting function (LIGHT,
BLINK, OFF) of the engine rpm indi-
cator light MAIN (white) LED.
2.MAIN
Set the engine rpm used to light the
MAIN (white) LED.
3.BRIGHT
Set the brightness of the MAIN
(white) LED.
To Next Page
Loading...
