2-58
2. Press the select switch (Up or
Down) to select the lighting mode
(LIGHT, BLINK, OFF) of the engine
rpm indicator lights. The engine rpm
indicator “” is interlinked with the
selection of LIGHT or BLINK.
3. Press the select switch (Down) for
about 2 seconds to confirm the set-
ting and return to the setting screen.
Indication patterns of the engine rpm
indicator lights and engine rpm indicator
“” are shown below.
MODE
LIGHT
“”
BLINK
“”
OFF
MAIN LED
Blink
–
Engine rpm
indicator “”
–
To Next Page
Loading...
