2-91
LOCK (“LOCK” position)
• The handlebars lock.
• The lights do not come on.
• The key can be removed.
To prevent theft, lock the handlebars
when leaving the motorcycle. We rec-
ommend also using a chain lock.
<Locking>
1. Turn the handlebars all the way to
the left.
2. While pushing the key in, turn it from
OFF to LOCK.
3. Pull the key out.
NOTE:
• Move the handlebars to the left and
right, and check that they are locked
firmly.
• If the handlebars are difficult to lock,
turn the key while moving them
slightly to the right.
<Unlocking>
Insert the key and while pushing it in,
turn it from LOCK to OFF.
NOTE:
• Before riding, move the handlebars
to the right and left, and check that
they turn the same amount in both
directions.
• The ignition switch key hole features
a lid that covers it.
• If the lid hole is misaligned, align the
lid hole to the key hole.
“P” (PARKING) position
When parking the motorcycle, lock the
steering and turn the key to the “P”
position. The key can now be removed
and the position light, license plate light
and taillight will remain lit and the steer-
ing will be locked. This position is for
night time roadside parking to increase
visibility.
To Next Page
Loading...
