2-93
HANDLEBAR SWITCHES
DIMMER SWITCH/HEADLIGHT
FLASHER SWITCH
Dimmer switch
Changes the headlight between high-
beam and low-beam.
1
: High-beam
2: Flasher
High-beam “”
Push the switch away from you to
change to high-beam.
Low-beam “
”
Pull the switch toward you to change to
low-beam.
Headlight flasher switch “ ”
Turns the headlights to high-beam while
the switch is pulled toward you. Releas-
ing the switch returns the headlights to
low-beam.
NOTICE
If tape is applied to the headlight, the
location where the tape has been
applied may melt due to heat from
the light.
Do not apply tape to the headlight.
To Next Page
Loading...
