2-112
BRAKE LEVER
DESCRIPTION
The front and rear brakes are simulta-
neously applied by squeezing the brake
lever gently toward the throttle grip. This
motorcycle is equipped with a disk
brake system and excessive pressure is
not required to slow the machine down
properly. The brake light will be lit when
the lever is squeezed inward.
The space between the brake lever and
grip can be adjusted to 5 settings.
ADJUSTMENT
1. Push the brake lever forward and
rotate the adjuster 1 to the desired
position.
2. Align the numbers on the adjuster
with the “Alignment mark” 2.
To Next Page
Loading...
