2-129
To set the rebound damping force
adjuster to the standard position, turn
the adjuster clockwise until it stops and
then turn it counterclockwise 1-1/4 turn.
• Turn the adjuster clockwise from the
standard position to stiffen the
damping force.
• Turn the adjuster counterclockwise
from the standard position to soften
the damping force.
The damping force should be adjusted
gradually, 1/8 turn at a time, to fine-tune
the suspension.
WINDSHIELD
HEIGHT ADJUSTMENT
(V-STROM 1050)
The windshield height can be adjusted
to 3 positions. To change the windshield
height, follow the procedure below.
1. Remove the bolts 1 and then
remove the windshield 2.
To Next Page
Loading...
