3-6
CAUTION
The exhaust pipe, muffler and the
engine become hot when the engine
is running. Touching them before
they cool down may cause burns.
When performing maintenance on
parts close to the exhaust pipe, muf-
fler or engine, wait until they have
cooled down sufficiently to touch
before starting maintenance.
NOTICE
Performing maintenance with your
motorcycle in an unstable location
may result in the motorcycle falling
over during the process.
Perform maintenance in a location
with a flat solid surface.
NOTICE
Servicing electrical parts with the
ignition switch in the “ON” position
can damage the electrical parts when
the electrical circuit is shorted.
Turn off the ignition switch before
servicing electrical parts to avoid
short-circuit damage.
To Next Page
Loading...
