3-24
8. Remove the battery holder 6.
9. Remove the battery
7.
10.Wipe any white powder adhering to
the terminal section away with warm
water. If there is severe corrosion,
buff it off with sandpaper.
NOTE:
• When removing battery cables, be
sure to set the ignition switch to OFF
and remove the negative (-) side
first. When attaching battery cables,
attach the positive (+) side first.
• Tighten so that there is no slackness
in the terminal section, and attach
the positive (+) terminal cover firmly.
• When replacing the battery, consult
a Suzuki dealer.
To Next Page
Loading...
