3-64
BRAKE PADS
Inspect the front and rear brake pads to
see if they are worn down to the
grooved wear limit line
1. If a front or
rear pad is worn to the grooved wear
limit line, both front or both rear pads
must be replaced with new ones.
After replacing either the front or rear
brake pads, the brake lever or pedal
must be pumped several times. This will
extend the pads to their proper position.
New brake pads work with different
strength when applied, so ride carefully.
NOTE: Do not squeeze/depress the
brake lever/pedal when the pads are
not in their positions. It is difficult to
push the pistons back and brake fluid
leakage may result.
FRONT
REAR
To Next Page
Loading...
