3-85
16.Tighten the axle holder bolts 5 to
the specified torque.
17.Reinstall the brake calipers and
speed sensor.
18.After installing the wheel, apply the
brake several times to restore the
proper lever stroke.
Front axle nut tightening torque:
72.5 lbf-ft (100 N·m, 10.0 kgf-m)
Front axle holder bolt
tightening torque:
16.5 lbf-ft (23 N·m, 2.3 kgf-m)
Front brake caliper mounting bolt
tightening torque:
28.0 lbf-ft (39 N·m, 3.9 kgf-m)
Front wheel speed sensor mounting
bolt
tightening torque:
7.0 lbf-ft (10 N·m, 1.0 kgf-m)
To Next Page
Loading...
