2-24
INSTRUMENT PANEL
INITIAL METER DISPLAY
When you turn the ignition switch to
ON, the meter will act as follows.
• All LCD 1 segments appear and
then show the normal display.
• The following indicator lights come
on for 3 seconds.
- Malfunction indicator light 2
- Master warning indicator light 3
- Freeze indicator light 4
- Engine rpm indicator light 5
- Cruise control indicator light 6
(V-STROM 1050XT)
• The following indicator lights come on.
- Oil pressure / engine coolant tem-
perature / battery voltage warning
indicator light
7
- ABS indicator light 8
- Traction control indicator light 9
NOTE: Refer to the explanation of each
indicator in this section for the turn-off
condition.
To Next Page
Loading...
