2-41
HILL HOLD INDICATOR
(V-STROM 1050XT)
The hill hold indicator in the LCD dis-
play indicates the hill hold operation sta-
tus, as follows.
For details about hill hold, see “HILL
HOLD (V-STROM 1050XT)” on page 2-
84.
NOTE:
• The hill hold indicator blinks to notify
the rider about 27 seconds after the
brake lever and brake pedal are
released. The system is deactivated
about 3 seconds after the indicator
starts blinking.
• If the battery voltage is low, the ABS
warning light and (H) OFF indicator
light temporarily when the engine is
started. There is no problem if both
lights turn off when the motorcycle
speed exceeds 3 mph (5 km/h).
Indicator System status
Not Lit Standby
Lit
System controlling
brakes
Blinking
Advance notification
of brake control
release
Lit
• System off
• System failure
To Next Page
Loading...
