2-65
QUICK SHIFT
Set the mode setting for “Quick Shift” sys-
tem to “OFF” or “ON”.
Once the “Quick Shift” system has been set
on the instrument panel display, the shift
change operation is available without using
the throttle grip or clutch lever during riding.
When the motorcycle starts moving from the
stopping status, or is stopped with the gear
engaged, it is required for you to use the
clutch lever.
NOTE: For the riding with the “Quick Shift”
system used, see “Quick Shift operation pro-
cedure” on page 2-112.
1. Display the MENU view.
2. Select “RIDE” using the SELECT switch
/ , and then press the MODE
switch.
3. Select “QS SET” using the SELECT
switch / , and then press the
MODE switch.
To Next Page
Loading...
