2-110
NOTE:
• When changing gears, move the lever
fully until you feel the lever click.
• Do not increase engine speed exces-
sively. Doing so will negatively affect
engine life.
• Do not ride at an excessive speed.
• If something appears strange while rid-
ing, have the motorcycle checked imme-
diately by your dealer.
• Take care when riding to ensure that
engine speed does not enter the red
zone.
• It is easy to enter the red zone when rev-
ving the engine or accelerating suddenly
in 1st or 2nd gear, so particular care is
required in such situations.
• If engine speed enters the red zone,
close the throttle promptly to reduce
engine speed.
• When the gear position changes to neu-
tral while riding, the engine speed limiter
functions to protect the engine and
power systems, limiting engine speed.
What is “Quick Shift” system
The “Quick Shift” system is a function that
assists the shift change operation during
motorcycle riding.
Once the “Quick Shift” system has been set
on the instrument panel display, the shift
change operation is available without using
the throttle grip or clutch lever during riding.
When the motorcycle starts moving from the
stopping status, or is stopped with the gear
engaged, it is required for you to use the
clutch lever.
1 Gearshift sensor
To Next Page
Loading...
