2-128
Damping Force Adjustment
The rebound damping force can be adjusted
by turning the adjuster. The rebound damp-
ing force adjuster 2 is located at the bottom
of the rear suspension. To adjust the damp-
ing force, set the adjuster to the standard
setting first and then adjust the adjuster to
the desired position.
<Rebound damping force standard
setting>
To set the rebound damping force adjuster
2 to the standard position, turn the adjuster
clockwise until it stops and then turn it coun-
terclockwise 1-1/4 turns.
• Turn the adjuster clockwise from the
standard position to stiffen the damping
force.
• Turn the adjuster counterclockwise from
the standard position to soften the
damping force.
H S
TEN
To Next Page
Loading...
