3-68
4. Remove the axle nut 4.
5. Loosen the axle stopper bolts 5.
6. Loosen the axle stopper bolts 6.
7. Place an accessory service stand or
equivalent under the swingarm to help
stabilize the rear end.
8. Carefully position a jack under the
exhaust pipe and raise it until the front
wheel is slightly off the ground.
NOTICE
Improper jacking may cause damage to
the fairing or oil filter.
Do not place the jack under the lower
part of the fairing or the oil filter when
jacking up the motorcycle.
To Next Page
Loading...
