3-70
15. Tighten the axle stopper bolts 6 to the
specified torque.
16. Reinstall the brake calipers and speed
sensor.
17. After installing the wheel, apply the
brake several times to restore the proper
lever stroke.
Front axle nut tightening torque:
100 N·m (10.2 kgf-m, 74.0 lbf-ft)
Front axle stopper bolt
tightening torque:
23 N·m (2.3 kgf-m, 17.0 lbf-ft)
Front brake caliper mounting bolt
tightening torque:
26 N·m (2.7 kgf-m, 19.5 lbf-ft)
Front wheel speed sensor mounting bolt
tightening torque:
10 N·m (1.0 kgf-m, 7.5 lbf-ft)
To Next Page
Loading...
