7-27
2. Unhook the hooks and pull off the
cover.
3. Pull off the spark plug caps.
4. Remove the spark plugs with a
spark plug wrench.
Spark Plug Inspection
0.8 – 0.9 mm
(0.031 – 0.035 in)
To maintain a hot, strong spark, keep
the plugs free from carbon. Adjust the
gap to 0.8 – 0.9 mm (0.031 – 0.035 in)
for good ignition. Use a thickness
(feeler) gauge to check the gap.
To Next Page
Loading...
