7-28
Installation
NOTICE
Improper installation of the spark
plug can damage your motorcycle.
An overly-tight or cross-threaded
spark plug will damage the aluminum
threads of the cylinder head.
Carefully turn the spark plug by
hand into the threads. If the spark
plug is new, tighten it with a wrench
about 1/2 turn past finger tight. If
you are reusing the old spark plug,
tighten it with a wrench about 1/8
turn past finger tight.
NOTICE
Dirt can damage the moving engine
parts of your motorcycle if it enters
an open spark plug hole.
Cover the spark plug hole while the
spark plug is out of the hole.
To Next Page
Loading...
