EasyManua.ls Logo

Suzuki VL800C - Engine Stalling Problems

Suzuki VL800C
123 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8-3
IGNITION SYSTEM CHECK
1. Remove the spark plugs and
reattach them to the spark
plug caps.
2. Put the engine stop switch in
the “” position and the igni-
tion switch in the “ON” posi-
tion. While holding the spark
plug with its base firmly
against the engine, push the
electric starter button. If the
ignition system is operating
properly, a blue spark should
jump across the spark plug
gap. If there is no spark, take
your machine to your autho-
rized Suzuki dealer or a quali-
fied mechanic.
COMPLAINT: Engine stalls.
1. Make sure there is enough fuel
in the fuel tank.
2. If the fuel injection indicator
displays “FI”, showing signs of
trouble in the fuel injection sys-
tem, take your machine to an
authorized Suzuki dealer.
Refer to the “INSTRUMENT
PANEL” section for an explana-
tion of the fuel injection system
indicator.
3. Check the ignition system for
intermittent spark.
4. Check the idle speed. If neces-
sary, adjust it using a tachom-
eter. The correct idle speed is
1000 – 1200 r/min.
WARNING
Performing the spark test
improperly can cause a high
voltage electrical shock or an
explosion.
Avoid performing this check if
you are not familiar with this
procedure, or if you have a
heart condition or wear a pace-
maker. Keep the spark plug
away from the spark plug hole
during this test.

Table of Contents

Related product manuals