7-20
THROTTLE CABLE
ADJUSTMENT
2.0 – 4.0 mm
(0.08 – 0.16 in)
To adjust the cable play:
1. Loosen the lock nut 1.
2. Turn the adjuster 2 so that the
throttle grip has 2.0 – 4.0 mm
(0.08 – 0.16 in) play.
3. Tighten the lock nut 1.
FUEL HOSE
Fuel Tank Lift
1. Place the motorcycle on the
side stand. Remove the seat
by referring to the BATTERY
section.
2. Remove the bolt 1.
3. Unhook the hooks. Disconnect
the coupler 2 and remove the
instrument panel assembly.
WARNING
Inadequate throttle cable play
can cause engine speed to rise
suddenly when you turn the
handlebar. This can lead to
loss of rider control.
Adjust the throttle cable play
so that engine idle speed does
not rise due to handlebar
movement.
To Next Page
Loading...
