Press the Start/Pause button
to start the newly selected
programme.
The new programme will
resume the course of the old
programme.
Follow the steps below to cancel a
programme while in operation.
Press and hold the
for 3 seconds.
While the programme is cancelling,
the Dry light will illuminate. The water
discharge process will start and
continue for 30 seconds.
When the programme is
cancelled, the End light will
illuminate.
Disconnect the plug and
When the End light illuminates, turn
the Programme Selection knob
Do not open the door before the
programme is complete.
Leave the door slightly open at
the end of a wash programme to speed up
the drying process.
If the door of the machine is
wash programme, the programme will
continue when the door is closed or when
the power returns.
If the power is interrupted
or if the machine door is opened during
the drying process, the programme will
terminate and your machine will now be
ready for a new programme selection.
EN - 22
To Next Page
Loading...
