Svan SVI639 - Advanced Functions; Boost Function Cancellation; Timing Function

Timing function
AND
OR
When the “+”of timing button is pressed, the time setting will increase by 1 minute;
And it will increase by 10 minutes when the “+”of timing button is long pressed.
When the “-”of timing button is pressed, the time setting will decrease by 1 minute;
And it will decrease by 10 minutes when the “-”of timing button is long pressed.
Timing confirmation:
Press the "iming" button, the timing indicator flashes, and you can set the
timer at this point.
Using the "+" and "-"buttons, you can realize the setting of timing from 1 to 99
minutes.
2. The boost function only works on the third cooking zone.
Cancellation of "Boost" function
Note:1. The boost function only operates for 5 minutes, after which the cooking
zone returns to its orginal setting.
When in the "Boost" function, select the relevant heating zone with the "Boost"
function, and press the "Boost" button or the "-" button to cancel the Boost
function, then the cooking zone will revert to its original setting.
B
Or press the "+" and "-" buttons simultaneously when the relevant heating zone
has been selected, the "Boost" function will be cancelled automatically. The
power setting immediately chang to 0, and this heating zone switch off at the
same time.
OR
Select the relevant cooking zone, and set the power level with the "+" or "-"
button. (e.g. the cooking zone 3 with power level 6)
Timing cancellation:
After selecting a set time, once the timing indicator flashes for 5 seconds, or press the
"iming" button, the set time will be confirmed to be valid automatically.
If press the + and - simultaneously, the timing can be cancelled automatically, with
the timing indicator showing 0.
25