Svan SVI639 - Safety and Zone Specifications; Interlock Function; Heating Zone Power

2. Press the “+” or “-“of timing button without select one cooking zone when the
induction hotplate is working, the time-warning function will operate. And the
warning time can be set just like the timing function. The buzzer will be beeping
for 30 seconds when the time is reached. The function will be cancelled when
the time is set to 0.
3. the time-warning function will be cancelled when the induction hotplate is
switched off.
Interlock Function:
To ensure the safety of children, the induction hotplate is provided with the function
of interlock.
Interlock:
Press the “Interlock” button, then the induction hotplate enters the locking state,
with the timing indicator showing “Lo”.
Unlock:
Holding the “Interlock” button for about 3 seconds, the locking state will be removed.
Note:
1. The rest buttons disabled except the “ON/OFF” and “Interlock” button when the
induction hotplate is in the locking state. Only unlocking the buttons or else the
induction hotplate won’t be operated.
2. If the induction hotplate enters the locking state in the off mode, the timing
indicator showing “Lo” for one minute. And it will be shown for one minute again
when the “ON/OFF” or “Interlock” button is pressed.
The max. power of each heating zone are as follows
Power(W)
Heating Zone
Dia. Of the Heating Zone
1 1500 160mm
2
20
3000
00 180mm
3
The above power may vary if the material or the size of pot is differet.
20mm
Note:
1. In the timing state, the power level of the relevant cooking zone can be changed,
and the time set is still valid.
AND
Normal
Boost
3600
------
------
26