EasyManua.ls Logo

Sven BF-11 - Preparation and Operation

Sven BF-11
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Hi-Fi jacks
Active subwoofer output
Magnetic shielding
MDF speaker cabinets
MDF speaker cabinets
Active speaker rear panelL
a VOLUME: volume control knob
b BASS: bass control knob
c INPUT R/L: audio input
d SUB.OUT: subwoofer output
e Terminals for connecting the speakers to
each other
f TREBLE: treble control knob
g Power LED
h POWER ON/OFF: power switch
i Power cable connector
j Power cable
5. PREPARATION AND OPERATION
Speaker placement
Place the speakers symmetrically to the
listener at least one meter away.
Place MSS far away from monitors and TV
sets, as insigniԛcant image distortion in these
supersensitive devices is possible.
MSS Connecting
BF-11/BF-21/BF-111 MSS can be connected to virtually any audio source: DVD/CD, PC sound
card, etc. (see connection diagram, Fig. 2), and to an active subwoofer, if necessary.
Before connecting, make sure that the MSS is unplugged. Then connect the speakers to each
other. For this purpose, insert the «+» side of the cable into the red «+» port, and the «–» side of the
cable into the white «–» port of the con-
nection terminals (see Fig. 2) of the passive speaker, then connect the audio cable to the active
speaker in the same way. Tighten the nuts of connection terminals securely.
Plug RCA connectors of the stereo signal cable into R and L audio inputs c of the MSS, then
connect the 3.5 mm mini-jack of the 2RCA to mini-jack signal cable (included) to the audio output
(Ø 3.5 mm ) of the audio source (see connection diagram, Fig. 2).
Notes:
To connect the MSS to a CD/DVD player or TV, it is necessary to use a Ø 3.5 mm mini-jack
to 2RCA adapter (included in the package contents) together with the 2RCA to Ø 3.5 mm
mini-jack stereo signal cable. For this purpose, the RCA cable should be connected to the
INPUT R/L c of the MSS (see connection diagram).
BF-11/BF-21/BF-111 MSS can be connected to an active subwoofer, which allows to
create a 2.1 speaker system. To connect a subwoofer (not included), use SUB.OUT d.
Fig. 1. Active speaker rear panel
a
d
c
e
b
g
h
j
VOLUME BASS TREBLE
Power
ON
OFF
SUB.OUT
f
i
~220V/50Hz
ENG
16
2.0 Multimedia Speaker System

Related product manuals