Need help?Do you have a question about the Sven PRO 600 and is the answer not in the manual?
Green indicator showing normal mains voltage and UPS operation.
Yellow indicator showing battery charging or charged status.
Red indicator for UPS operation in battery mode.
Button to turn the UPS on and off.
Indicates the UPS is operating from the mains.
Indicates the UPS is operating from the battery.
Displays the current output voltage of the UPS.
Shows the current load on the UPS.
Provides detailed status information.
Shows the remaining battery charge level.
Graphic display for HIGH, NORMAL, LOW input voltage.
Sockets for connecting equipment.
Cable for connecting the UPS to the mains.
Describes how to turn the UPS on and off, including autostart function.
Connects UPS to PC for parameter control and system shutdown via software.
Details battery type and factors affecting its durability.
Specifies optimal conditions for storing the UPS.
General| Type | Line-interactive |
|---|---|
| Output Power | 360 W |
| Number of Outlets | 4 |
| Output Connectors | IEC 320 C13 |
| Surge Protection | Yes |
| Frequency Range | 50/60 Hz |
| Battery Type | Lead-acid |
| Battery Voltage | 12 V |
To Next Page
