ENG
User’s Manual
PS-115
5
Connecting an additional speaker
It is possible to connect an additional speaker to the model "PS-115 " (Bluetooth mode only):
• Turn both speakers into Bluetooth mode.
• Connect the signal source to one of the speakers via Bluetooth (the second speaker should be in
search mode – indicator f should flash).
• On the first speaker, press and hold h.
• If two speakers are successfully connected between themselves, indicator f on the second
speaker will glow constantly.
TECHNICAL SPECIFICATIONS
Parameter, measurement unit Value
Frequency response, Hz 120 – 20 000
Output power (RMS), W 10 (2 × 5)
Membrane, mm Ø 52
Radius of operation Bluetooth, m до 10
Battery capacity, mA * h 1800
Power supply USB/DC 5V
Weight, g 460
Dimensions, mm 210 × 65 × 64
Notes:
• Technical specifications given in this table are supplemental information and cannot give
occasion to claims.
• Technical specifications and package contents are subject to change without notice due to
the improvement of SVEN production.
Technical support is on www.sven.fi.
Fig. 2. Connection diagram
USB to micro USB
power cable
USB jack
Mini-jack to mini-jack
signal cable
Mobile device
PC
Socket
To Next Page
Loading...
