Sven PS-265 - Advanced Connectivity and Specifications; Connecting an Additional Speaker; Technical Specifications

ENG
User Manual
PS-260
PS-265
5
Connecting an additional speaker
For model «SVEN PS-260/265» you can connect an additional speaker (Bluetooth mode only):
• Turn on both speakers (long press button a) and select Bluetooth mode. On both speakers,
indicator h will flash blue.
• On one of the speakers or the active speaker (which is already connected to the source) press
button a twice. The speakers will connect with each other.
Note. At the subsequent inclusion of both speakers, they will be connected automatically.
Fig. 2. Connection diagram
TECHNICAL SPECIFICATIONS
Notes:
• Technical specifications given in this table are supplemental information and cannot give
occasion to claims.
• Technical specifications and package contents are subject to change without notice due to the
improvement of SVEN production.
Parameter, measurement unit Value
Frequency response, Hz 120 – 20 000
Output power (RMS), W 10
Speaker diameter, mm Ø 52
Rated current consumption, A 0,17
Battery capacity, mA*h 2000
Power supply USB
5V
Weight, g 600
Dimensions, mm 93 × 93 × 210
Technical support is on www.sven..
USB to USB type-C
power cable
USB jack
Mini-jack to mini-jack
signal cable
Mobile
device
PC
Socket