What to do if my Sven SPS-855 Speaker System has no power?
If your Sven Speaker System has no power, it could be due to the power plug not being connected properly. Ensure it is securely connected. Another possible cause is that the power switch is not turned on. Make sure to turn the power switch on.
Why is there no sound coming from my Sven SPS-855?
If there is no sound from your Sven Speaker System, check if the volume potentiometer is at the minimum position and adjust it accordingly. Also, ensure that the signal is connected properly.
What to do if the woofer of my Sven SPS-855 has no sound or low volume?
If the woofer of your Sven Speaker System has no sound or low volume, ensure the signal line is properly connected. Also, check if the volume controls are at the minimum position and adjust them accordingly.
How to fix distortion in my Sven SPS-855?
If you are experiencing distortion with your Sven Speaker System, it may be because the volume is too loud. Try adjusting the volume controls to a lower level.
Adjusts the main system volume level.
Adjusts the subwoofer's volume independently.
LED light indicating the system's power status.
Connects 5.1 or stereo audio sources.
Connects satellite speakers to the amplifier.
Turns the acoustic system on and off.
Connects the system to the mains power outlet.
General| Signal-to-Noise Ratio | ≥ 75 dB |
|---|---|
| Type | 2.1 |
| Frequency Response | 40Hz - 20kHz |
| Connectivity | RCA |
| Power supply | ~220 V, 50 Hz |
| Material | Wooden subwoofer, plastic satellites |
| Input Impedance | 10kΩ |
To Next Page
