Why is my Sven SPS-619 sound distorted?
If your Sven Speaker System produces distorted sound, it's likely due to a large amplitude of the input signal. To fix this, decrease the volume both on your audio source and on the Speaker System itself.
What to do if there is no sound from Sven Speaker System?
If there is no sound from your Sven Speaker System, make sure that the volume isn't set too low by checking and adjusting the volume control knob. Also, verify that the audio source is correctly connected.
Why is my Sven Speaker System volume so quiet?
If your Sven Speaker System sound is too quiet, the volume level might be set too low. Try adjusting the volume control knob to increase the sound level.
General| Power Supply | 220V, 50Hz |
|---|---|
| Type | 2.1 |
| Frequency Response | 40Hz - 20kHz |
| Impedance | 4Ω |
| Dimensions (Satellite) | 90 x 150 x 75 mm |
| Material | Plastic |
| Signal-to-Noise Ratio | ≥ 75 dB |
To Next Page
