What to do if there is no sound from my Sven SPS-821?
If you're not getting any sound from your Sven Speaker System, there are a couple of things to check: * Make sure the volume isn't set too low; adjust the volume control knob. * Verify that your audio source is properly connected.
Why is my Sven SPS-821 Speaker System sound too quiet and distorted?
If the sound from your Sven Speaker System is too quiet or distorted, it could be due to a couple of reasons: 1. The volume level might be set too low. Try adjusting the volume control knob. 2. The input signal might be too strong. Reduce the volume on both your audio source and the MSS.
How to fix a Sven SPS-821 Speaker System that doesn't turn on?
If your Sven Speaker System isn't turning on: * First, check that it's properly connected to the mains outlet. * Also, make sure the power switch is turned on.
Why is the sound on my Sven SPS-821 Speaker System so quiet and distorted?
If the sound from your Sven Speaker System is too quiet and distorted, it could be due to a couple of reasons. First, check if the volume level is set too low; adjust the volume control knob. Also, if the input signal is too strong, turn down the volume on both your source and the Sven Speaker System itself.
How to fix a Sven Speaker System that doesn’t turn on?
If your Sven Speaker System isn’t turning on, start by checking that it's properly connected to the mains outlet. If it is, make sure the power switch is turned on.
General| Power supply | ∼ 220 V, 50 Hz |
|---|---|
| Type | 2.1 |
| Frequency Response | 40Hz - 20kHz |
| Controls | Volume, Bass |
| Signal-to-Noise Ratio | ≥ 75 dB |
To Next Page
