Sven PS-360 - Operation Modes; Radio Mode; MP3 Player Mode; Wired Mode (AUX)

ENG
5
PS-360
User Manual
Radio mode
• To improve radio reception, connect USB to USB type-C cable (included) to the input l orsig-
nal cable 3.5 mm mini-jack to 3.5 mm mini-jack (included) to input k.
Turn on the speaker system — press button e several times until, the radio mode will turn on.
Long-term pressing button d activates auto search mode. After scanning completion, therst
scanned radio station will start to operate automatically. With buttons a and b (long pressing)
select a desired radio station.
МР3 player mode
Attention! The le system of a USB ash carrier is FAT32. Maximum volume is 32 GB.
• Insert the USB ash carrier into appropriate slot. If the speaker system is in turned onposi-
tion, the playback will start automatically. Playback/Pause modes are switched over withthehelp
ofthe button d. Tracks can be controlled by buttons a (previous track) andb (next track).
The use in the wired mode (AUX)
• Speaker system can be used as an external device for amplifying any audio source witha3.5mm
output mini-jack. To do this, connect a cable 3.5 mini-jack — 3.5 mini-jack totheaudio output
AUX k.
* You might have to enter “0000” code to connect some models of devices via Bluetooth.
** If the item has been already registered in the device list of a source, then the second search
mode activation is not obligatory. Choose the item name “SVEN PS-360” and the “connect” com-
mand onthe source.
Connecting an additional speaker
For model “SVEN PS-360” you can connect an additional speaker (Bluetooth mode only):
Attention! Before connecting an additional speaker, disconnect rst speaker from signal source.
• Turn on both speakers (long press button g) and select Bluetooth mode.
Fig. 3. Connection diagram
USBMIC AUX DC IN RESET
Mini-jack to mini-jack
signal cable
Socket USB jack
PC Mobile
device
USB to USB type-C
power cable