page
|
11
Ultra Evolution Speaker Features & Specifications
Ultra Evolution Pinnacle Specs:
• In-room Frequency Response: 24Hz to 40kHz (+/-3 dB)
• Nominal Impedance: 6 ohms
• Sensitivity: 88dB (2.83V @ 1 meter full-space, 300Hz – 3kHz)
• Recommended amplifier power: 20 – 300 watts
• Floor-standing Tower Loudspeaker
• Piano gloss black, piano gloss white, real black oak veneer finish options
• Dual gold-plated 5-way binding posts
• Dual 3” wide-flared rear-firing ports
• Cloth grille with magnetic retention system
• Elastomer screw-in feet – adjustable for level
• Spiked metal screw-in feet included – adjustable for level
• Cabinet Dimensions: 49.61” (H) x 11.81” (W) x 18.14” (D) / 1260mm (H) x 300mm (W) x 460.7mm (D)
• Overall Dimensions: 50.2” (H) x 11.81” (W) x 18.14” (D) / 1275mm (H) x 300mm (W) x 460.7mm (D) (includes
grille, feet, and binding posts)
• Shipped Dimensions: 54.6” (H) x 16.3” (W) x 22.6” (D) / 1387mm (H) x 415mm (W) x 575mm (D)
• Weight Packaged: 110.8 pounds / 50.3 kgs
• Weight Unboxed: 96.7 pounds / 43.9 kgs
1” Diamond Coated Tweeter
• FEA-optimized Organic Cell Lattice Diffuser for airy, unveiled highs and pristine clarity
• Cutting-edge vapor-deposition grows a hyper-rigid diamond carbon coating on an aircraft-grade aluminum
dome, pushing high-frequency extension further beyond human hearing, and delivering best-in-class
fidelity, linearity, and transient response
• Silver tinsel for optimal signal transfer and power handling
5.25” Glass Fiber Composite Midrange Drivers
• Composite glass-fiber cone with excellent stiffness/mass ratio for high sensitivity and pistonic behavior
beyond pass-band
• Precision-cast aluminum-alloy baskets ensure precise alignment of critical components and maximize
thermal dissipation
• Vented Kapton voice coil former is exceptionally lightweight for excellent dynamics and transient response
Quad 8” Woofers in Force Balanced Array
• Long stroke motor and suspension for high output
• Composite glass-fiber cone with excellent stiffness/mass ratio for high sensitivity and pistonic behavior
beyond pass-band
• Precision-cast aluminum alloy baskets ensure precise alignment of critical components and maximize
thermal dissipation
• Vented aluminum voice coil former to maximize thermal control while minimizing air compression artifacts
at high drive levels
Crossover
• 3-way crossover with premium-grade capacitors, inductors, resistors and heavy-trace printed circuit board
• Tweeter-to-Midrange crossover: 1.8 kHz
• Midrange-to-woofer crossover: 140 Hz
Cabinet
• Acoustically-centered architecture orients the midrange and woofer arrays in rotational-symmetry around the tweeter,
ensuring that low, mid, and high-frequencies emanate from the same effective point in space, creating a coherent, integrated,
faithful acoustic image.
• Time-aligned cabinet geometry introduces microsecond-level time delays between the drivers, ensuring that the
effective-acoustic-center of each driver is equidistant from the listener. The result is improved linearity and directionality
throughout the crossover frequencies, and a more accurate soundstage.
• Quad 8” woofers in Force Balanced Array energize any room with deep, accurate, evenly distributed bass,
whilst contributing a net-zero vibration force to the cabinet and other components.
• Dual 5.25” midrange drivers share a dedicated acoustic-suspension enclosure, symmetrical around the tweeter.
• Chamfered front baffle and flush-mounted drivers reduce edge diffraction and improve on-axis and off-axis
high-frequency response.
• Extra-thick 1” (25mm) driver baffles ensure a rigid, resonance-free mounting for all drivers.
• FEA-optimized ¾” (18mm) cabinet construction, extensive bracing, and acoustic insulation eliminate acoustic and structural
resonances, ensuring an inert enclosure and an uncolored response, even at the highest drive levels.
Acoustic Speaker DriversCrossover & Cabinet
To Next Page
Loading...
