55--3366
① Max. speed
This function sets the maximum embroidery speed.
– SB Series Embroidery Machine: The default value is 1200[rpm], and the speed can be adjusted from the
minimum speed to 1200[rpm] by 10[rpm] each time.
– Multi-head E-Series Embroidery Machine: The default is 900[rpm], and the speed can be adjusted from
the minimum speed to 1200[rpm] by 10[rpm] each time.
– DM Series Embroidery Machine: The default is 1500[rpm], and the speed can be adjusted from the
minimum speed to 1500[rpm] by 10[rpm] each time.
② Min. speed
This function sets the minimum embroidery speed.
– The default is 300[rpm], and the value can be adjusted at the range from 300 [rpm] to the maximum
speed by the unit of 10[rpm].
③ EMB speed
This function sets the embroidery speed.
– The default is 800[rpm], and the value can be adjusted at the range from the maximum speed to the
minimum speed by the unit of 10[rpm].
④ Inching speed
This function sets the starting speed for embroidery work.
– The default is 100[rpm], and the value can be adjusted at the range from 50[rpm] to 200[rpm] by the unit
of 10[rpm].
⑤ Jump speed
This function sets the range of the jump stitch speed, which is characterized by frame move without sewing.
– The default is 1000[rpm], and the value can be adjusted at the range from 300[rpm] to 1000[rpm] by the
unit of 10[rpm].
⑥ Slow Speed
This function sets the embroidery speed during slow operation.
– The default is 650[rpm], and the value can be adjusted at the range from the minimum speed to the
maximum speed by the range of 10[rpm].
⑦ After Trimming Inching Stitch
When the color change signal is issued or when embroidery work for one design is completed, the closing is
conducted. At this time, the function sets the number of stitches to be made during slow operation.
– The default is 3 stitches, and the value can be adjusted at the range from 2 to 10 stitches by the unit of 1.
⑧ Auto Trimming
This function is to enable the automatic trimming function.
– The default is “Yes”, and to turn off the automatic trimming function, choose “No”.
To Next Page
Loading...
Need help?
General
