12
3.13) AUTOMATIC DETECTION OF UPPER AND LOWER THREAD BREAKS
－ The machine detects when the upper thread breaks or the lower thread is out of the needle and automatically
stops the machine.
3.14) FRAME CENTER
3.15) AUTOMATIC RETURN TO STOP POINT IN UNEXPECTED BLACKOUT
－ When the power fails unexpectedly, the frame moves back to the exact point where the stitching stopped.
This helps reduce the number of defects.
3.16) EXTERNAL FLOPPY DRIVE AND USB PORT
－ Through newly adopted USB port and portable FDD, data input/output has become very convenient, and it
is possible to input and output data while connected to PC.
3.17) EDITING
－ You can delete, change, or insert stitch data and function codes (jump, finish, trimming).
3.18) MULTI-LINGUISTIC SUPPORT
3.19) THE SCREEN WILL INDICATE THE CAUSE OF ANY MACHINE STOPS.
3.20) THE SCREEN INDICATES RPM DATA.
3.21) FRAME MOVEMENT SPEED
－ You can adjust the frame speed to high, medium, or low.
3.22) THE SCREEN INDICATES THE MEMORY AVAILABLE FOR USE.
3.23) YOU CAN USE 2-BINARY AND 3-BINARY TAPE CODES.
3.24) OTHER BRAND CODES
－ The machine can automatically read designs of various formats stored in the floppy disk.
[ Readable Format ]
1. SST 4. FMC, FDR 7. EXP
2. DST, DSB, DSZ 5. ZSK
3. TAP 6. 10O
To Next Page
Loading...
Need help?
General
