81
Omnivent Rooflight
Fig. 3
Safety precautions:
1. Repairs should be carried out only by
trained personnel
2. Inform an approved dealer in case of
defects and malfunctions
3. Before starting off, check the rooflight for
damage in the acrylic dome (tension
cracks) and the winding mechanism
which could arise owing to, for example,
branches and other natural causes.
4. Do not step in the acrylic dome
5. Close the roof light before starting off
(check whether it is locked)
6. Do not leave the vehicle with the rooflight
open (danger of burglary or from rain)
7. Do not open in strong wind or rain
8. Before opening, remove snow, ice, dirt,
etc. from the acrylic dome
9. Malfunctions are to be repaired by an
approved dealer at once
10. Do not use caustic detergents (danger of
tension cracks in the acrylic dome)
Care instructions:
- Please clean the acrylic panes with the
Seitz Acrylic Cleaner.
- Stains and light scratches on the acrylic
pane can be removed by using the Seitz
Acrylic Polish and the Seitz special
polishing cloth.
- Use talcum powder (4 times yearly) to
care for the rubber seals
- Clean the blinds only with water and mild
soap suds
- The guarantee becomes null and void if
these instructions are not followed.
THE OMNIVENT (12V) ROOFLIGHT
The Omnivent is a double glazed rooflight
constructed from a synthetic ultra-violet
screened material. Its side operating
mechanism allows a completely free central
opening with built-in fixed ventilation when
closed.
Red Switch = Mode of Operation
Induction (IN)
Expel (OUT)
Black Switch = Speed Control
1, 2 and 3
Omnivents give no fixed ventilation when set
on induction.
SHOWER
When using the shower, always ensure that
the shower curtain is fully drawn thus
avoiding water spray on unprotected areas.
Equipment Details
IN
OFF
OUT