Swift Sterling User Manual

FITTED EQUIPMENT
107
Symbol Operating mode Description
– Off Fan is switched off
a Vent
Circulating air, if no device is in operation. 9 speed levels can
be selected.
b Eco Low fan level
c Mid High fan level (only Combi Gas)
d High
Fast heating of the room. Available, if the difference between
the selected and current room temperature is >10 °C.
Set timer
• Use the control knob / push button to select
the symbol in menu line (4).
• Click to change to the setting level.
Note: If the timer is activated (ON), the timer
in the menu is shown as deactivated (OFF).
Enter start time
• Use the control knob / push button to set the
hours, then the minutes.
Enter end time point
• Use the control knob / push button to set the
hours, then the minutes.
Note: If the start / end times are exceeded
when entered, the operating parameters are
only taken into consideration when the next
start / end times are reached. Until then, the
operating parameters set outside the timer
remain valid.
Set the room temperature
• Click to change to the setting level.
• Use the control knob / push button to select
the required room temperature.
• Click the control knob / push button to
confirm the value.
Set the warm water level
• Click to change to the setting level.
• Use the control knob / push button to select
the required warm water level.
• Click the control knob / push button to
confirm the value.

Swift Sterling Specifications

General

Brand	Swift
Model	Sterling
Category	Caravans
Language	English