EasyManuals Logo

Swift Tourer User Manual

Swift Tourer
223 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #106 background imageLoading...
Page #106 background image
FITTED EQUIPMENT
104
Technical data
determined in accordance with EN 624 or
Truma test
Device category
I3 B/P in accordance with EN 437
Type of gas: Liquid gas (propane / butane)
Operating pressure: 30 mbar (see type plate)
Water contents: 10 litres
Heating up time from approx. 15° C to
approx. 60° C
Boiler approx. 20 minutes (measured
according to EN 15033) Heater + boiler
approx. 80 min.
Pump pressure: max. 2.8 bar
System Pressure: max. 4.5 bar
Rated thermal output
(automatic output levels)
Gas Operation:
Combi 2 E UK: 2000 W
Combi 4 E: 2000 W / 4000 W
Electrical operation
Combi 2 E UK/ 4 E: 900 W / 1800 W
Mixed operation (gas and electrical)
Combi 2 E UK:
Combi 4 E: max. 3800 W
Gas consumption
Combi 2 E UK: 160 g/h
Combi 4 E: 160 – 320 g/h
Readiness-heat power requirement
Combi 2 E UK / 4 E :
Gas operation 5.2 g/h
Air delivery volume (free-blowing without
hot-air pipe)
Combi 2 E UK:
Combi 4 E: with 3 hot-air outlets max.
249 m³/h
with 4 hot-air outlets max. 287 m³/h
Current input at 12 V
Heater + Bolier
Combi 2 E UK
Combi 4 E: Short-term max. 5.6 A
(average power consumption 1.1 A)
Heating up of boiler: 0.4 A
Stand-by: 0.001 A
Heating element FrostControl (optional):
maximum 0.4 A
Current input of 230 V
3.9 A (900 W) or 7.8 A (1800 W)
Weight (not containing water)
Heater unit - 15.1kg
Heater ubit with peripheral devices - 15.6kg
TRUMA COMBI BOILER

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Swift Tourer and is the answer not in the manual?

Swift Tourer Specifications

General IconGeneral
BrandSwift
ModelTourer
CategoryMotorhomes
LanguageEnglish

Related product manuals