FITTED EQUIPMENT
172
CARE OF LAMINATE TOPS / DOORS / TABLES /
12V READING LAMP
CARE OF LAMINATE TOPS,
TABLES, FURNITURE
AND DOORS
DO NOT use abrasives, chemically treated
cloths or aggressive detergents as these may
cause damage
DO NOT place hot objects on laminated
surfaces i.e. tops, tables. Any temperatures
70°C and over may cause permanent damage.
Clean worktop surfaces, furniture and door
fascias with a soft, slightly damp cloth, dry off
with a soft cloth.
DOORS
In order to provide customers with the latest
designs of door furniture it is possible, due
to the use of natural wood, that warping may
occur. This should not detract from the correct
functioning of items fitted in the caravan.
Information
During the normal travelling vehicle vibration
and flexing may cause some of the furniture
doors to become out of alignment.
For your convenience many hinges are
adjustable.
TABLES
Slide the top of the chest of drawers forward
to form a convenient table. Lift the rear portion
to slide the top away. (Fig. A)
Fig. A
CAUTION: When erecting the free standing
table, be careful to avoid trapping fingers.
TABLE STORAGE
To avoid damage care must be taken when
removing tables from their stored position.
Where two tables are stored together in a
low level storage area care should be taken
to remove the table positioned opposite the
hinged edge first.
Tables stored in the table storage
compartment must be securely clipped into
place whilst in transit.
12V READING LAMP
WARNING 12v tungsten reading/ spotlamps
generate high temperatures when in use, the
body, lens/ bulb may become very hot. NEVER
make directional adjustment in the direction
of flammable materials i.e. curtains, nets or
blinds.
To Next Page
Loading...
Need help?
General
