51
• The same external pump can be used with
the upper inlet, this will transfer water from
the external source to the internal tank.
• When filling the internal tank, monitor the
amount of water in the tank and stop filling
before the tank overflows via the switch on
the control panel.
• Please see label on bed flap rear for valve
operation.
• The control panel above the door
has buttons to turn on and off both
the internal and external pumps.
On Arrival at the campsite /
Priming the system
The caravan water system can be used with or
without the internal water tank.
To use the caravan without the internal
water tank:
• Ensure that the external water container
is full.
• Connect the external pump to the lower
connection point on the outside of the
caravan, labelled ‘direct to taps’.
• Move the White selector valve close to
the pump anti-clockwise to select the
external source.
• Close all of the taps except one, and
follow the steps as detailed for a caravan
without internal water tank.
White valve Water heater
drain valve
Tank drain
valve
To Next Page
Loading...
Need help?
General
