Swing-N-Slide WS 8356 - User Manual

ASSEMBLY INSTRUCTIONS
6ZLQJ16OLGH%DUEHUU\'ULYH-DQHVYLOOH:LVFRQVLQ
9LVLWRXUZHEVLWHDWZZZVZLQJQVOLGHFRPRUFDOOXVDW
6ZLQJ16OLGH,QF 3ULQWHGLQ86$ /$
IMPORTANT!!
PLEASE READ BEFORE BEGINNING ASSEMBLY!!
Please make sure all lumber, hardware and accessory parts are accounted for.
If you are missing anything, please DO NOT RETURN to the store where purchased.
Please call our Customer Service Department at the number below.
LDR 2-25-2018
WS 8356

Summary

Assembly Instructions

Important Preparation and Warnings

Crucial pre-assembly reading and warnings before commencing playset assembly.

Safety Guidelines

Safety Checklist and Maintenance

Detailed safety checklist and periodic maintenance procedures for playset care.

Playground Surfacing

Protective Surfacing Selection and Placement

Guidance on choosing safe, shock-absorbing materials and their placement.

Safety Zone Requirements

Defining Safe Play Area Dimensions

Specifies the required clear zones around the playset for user protection.

Assembly Preparation

Assembly - Frame Construction

Step 1: Assemble Frame A

Instructions for constructing the first main frame component (Frame A).

Step 2: Assemble Frame B

Instructions for constructing the second main frame component (Frame B).

Step 4: Connect Frame A and Frame B

Joining Frame A and Frame B to form the main structure.

Step 9: Assemble Frame C

Constructing the third main frame component (Frame C).

Step 12: Attach Frame C to Tower

Connecting the completed Frame C to the main tower structure.

Assembly - Frame Construction

Assembly - Decking and Supports

Assembly - Windows

Assembly - Swing Beam

Step 21: Install Swing Beam Support

Attaching the main support structure for the swing beam.

Step 22: Attach Swing Hangers to Beam

Securing swing hangers to the swing beam support.

Step 26: Install Swing Beam

Attaching the main swing beam to the assembled structure.

Assembly - A-Frame

Step 23: Assemble A-Frame Structure

Constructing the A-frame structure for the swing set.

Assembly - Swing Beam

Step 24: Attach Swing Beam Brackets

Step 25: Install Swing Beam Brace

Assembly - Roof

Assembly - Roof

Step 31: Attach Roof Frame to Tower

Assembly - Rock Wall

Assembly - Rock Wall

Step 34: Attach Rock Wall Structure

Assembly - Climbing Rocks

Assembly - Ladders

Assembly - Monkey Bar

Step 38: Assemble and Attach Monkey Bar

Assembling and connecting the monkey bar structure to the playset.

Assembly - Picnic Table

Step 39: Assemble and Install Picnic Table

Assembly - Fort Enclosure

Assembly - Enclosure;Barriers

Assembly - Slides

Step 42: Install Slide Support Boards and Slide

Step 43: Install Slide Support Boards and Slide

Assembly - Swings

Step 45: HD Ring-Trap Combo Assembly

Assembly - Swings

Step 46: HD Swing Seats Installation

Attaching HD swing seats to the swing hangers, ensuring proper clearance.

Anchoring the Playset

Step 47: Install Anchor-It System

Securing the playset to the ground using the Anchor-It system.

Manufacturers Limited Warranty

Warranty Registration and Coverage Details

Details on registering the product and the scope of limited warranties provided.

Product Warranty and Registration

Online Registration Benefits and Process

Customer Support Information

Contacting Customer Service Representatives

Contact details and support hours for customer service and technical assistance.

Swing-N-Slide WS 8356 Specifications