Need help?Do you have a question about the SwitchDoc Labs WeatherRack2 and is the answer not in the manual?
General| Type | Weather Station |
|---|---|
| Sensors | Anemometer, Wind Vane, Rain Gauge |
| Connectivity | Wired |
| Power Supply | 3.3V to 5V DC |
| Compatibility | Raspberry Pi, Arduino |
| Wind Direction Resolution | 16 points (22.5 degrees) |
| Rainfall Resolution | 0.011 inches (0.2794 mm) per tip |
| Rain Gauge Resolution | 0.2794 mm per tip |
| Wind Direction | 360 degrees |
To Next Page