EasyManua.ls Logo

SWM SM 500 R E4 2018 - User Manual

SWM SM 500 R E4 2018
86 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SM 500 R E4 2018
Manuale - Uso - Manutenzione
Manual - Operation - Maintenance
Manuel - Utilisation - Entretien
Handbuch - Gebrauch - Wartung
Manual - Uso - Mantenimiento

Other manuals for SWM SM 500 R E4 2018

Question and Answer IconNeed help?

Do you have a question about the SWM SM 500 R E4 2018 and is the answer not in the manual?

Summary

Important Notices and Warnings

SM Models Legal Status and Warranty

SM models are street legal, covered by warranty if configuration is maintained.

Important Information and Part Replacement

Maintaining Vehicle Guarantee

Follow maintenance programs at authorized dealers to maintain the guarantee.

Safe Riding and Motorcycle Safety

General Safety and Riding Principles

Prioritize rider/passenger safety, use proper gear, maintain visibility, and obey traffic laws.

Riding Safety and Warnings

Alcohol and Drug Use Warning

Never ride under the influence of alcohol or drugs.

Carbon Monoxide Hazards

Exhaust gas contains deadly carbon monoxide; avoid enclosed spaces.

Controls Location

Gearbox Control Pedal Operation

Explains how to use the gearbox control pedal for shifting gears and neutral.

Digital Instrument and Warning Lights

Digital Instrument Overview

Describes the digital instrument with 5 indicator lights: high-beam, engine malfunction, indicators, neutral, and ABS.

Warning Light Functions

Details the function of high-beam, engine malfunction, turn indicators, neutral, and ABS warning lights.

Left Handlebar Switch and ABS Control

Rear Wheel ABS Exclusion

Selector to deactivate the ABS function on the rear wheel for circuit riding.

Riding Preparation and Systems

Essential Pre-Ride Inspection Checklist

Comprehensive checklist of essential inspections before riding the motorcycle.

Anti-Lock Braking System (ABS) Explanation

Explains how the ABS system works, its function, and limitations.

Motorcycle Running-In Instructions

Crucial rules for the first 1500 km to ensure motorcycle life and performance.

Troubleshooting Common Issues

Engine Starting and Running Problems

Covers no start, starting troubles, erratic running, power loss, and knocking.

Ignition, Charging, and Overheating Issues

Addresses alternator charging, battery overheating, and engine overheating.

Drivetrain and Braking Problems

Solutions for shifting difficulty, clutch slip, and brake malfunctions.

Spark Plug and Knocking Issues

Troubleshooting for spark plug fouling and engine knocking.

Mounting and Dismounting the Motorcycle

How to Mount the Motorcycle as a Rider

Step-by-step guide for a rider to safely mount the motorcycle.

Passenger Mounting

How to Mount the Motorcycle as a Passenger

Instructions for a passenger to safely mount the motorcycle.

Dismounting and Mirror Adjustment

How to Dismount the Motorcycle

Step-by-step guide for safely dismounting the motorcycle.

Starting the Engine

Starting the Engine (Cold)

Detailed steps for starting the engine when it is cold.

Cold Start Procedure at Low Temperatures

Recommends brief engine warming for proper oil circulation and coolant temperature.

Stopping the Motorcycle and Emergency Procedures

Standard Stopping Procedure

Steps to slow down and stop the motorcycle using throttle and brakes.

Emergency Engine Stop Procedure

How to immediately stop the engine using the kill switch in case of malfunction.

Engine Oil and Filter Maintenance

Engine Oil Level Check

Instructions on how to check the engine oil level using the inspection window.

Engine Oil Draining Procedure

Steps for draining engine oil with a warm engine.

Oil Filter Cartridge Replacement

Mentions filter replacement as described in subsequent steps.

Oil Filter Maintenance

Metal Oil Filter Cleaning Procedure

Detailed steps for cleaning metal oil filters after draining oil.

Oil Filter Cartridge Replacement Procedure

Step-by-step guide for replacing the oil filter cartridge.

Coolant Level Check

Coolant Level Check Procedure

How to check the coolant level in the radiator and expansion tank.

Coolant Replacement

Coolant Draining Procedure

Steps for draining the coolant from the system.

Coolant Filling Procedure

Steps for refilling the coolant and removing air bubbles.

Throttle Cable Adjustment

Throttle Cable Adjustment Procedure

Step-by-step guide to check and adjust the throttle cable free play.

Spark Plug Check and Replacement

Spark Plug Gap Specification

Specifies the correct gap for the spark plug.

Spark Plug Removal and Refitting

Instructions for cleaning, greasing, and tightening the spark plug before refitting.

Air Filter Maintenance

Accessing the Air Filter

Instructions on how to access the air filter by removing other components.

Air Filter Cleaning and Replacement

Check filter for clogging, clean with compressed air, or replace if too dirty.

Steering Adjustment

Steering Play Check and Adjustment

Procedure to check and adjust steering wheel play for safety.

Control Lever and Brake Fluid Checks

Front Brake Fluid Level Check

How to check the front brake fluid level in the reservoir.

Rear Brake Fluid Level Check

How to check the rear brake fluid level against the indicated mark.

Hydraulic Clutch Fluid Maintenance

Hydraulic Clutch Fluid Level Check

Procedure to check the hydraulic clutch fluid level.

Hydraulic Clutch Bleeding and Suspensions

Hydraulic Clutch Bleeding Procedure

Step-by-step guide for bleeding the hydraulic clutch system.

Front Fork Adjustment and Oil Level

Front Fork Rebound and Compression Adjustment

Details adjustment for rebound and compression damping, including reset and effects.

Fork Oil Level Check and Specifications

Procedure to check oil level and specifications for oil quantity and height.

Rear Shock Absorber Adjustment

Rear Shock Absorber Adjustment Procedure

Step-by-step guide for adjusting the rear shock absorber.

Shock Absorber Spring Preload Adjustment

Instructions for adjusting the rear shock absorber spring preload.

Shock Absorber Hydraulic Damping

Compression Damping Adjustment

Details adjustment for compression damping, including reset and effects.

Rebound Damping Adjustment

Details adjustment for rebound damping, including reset and effects.

Chain Adjustment and Maintenance

Chain Adjustment Importance and Procedure

Ensures security and prevents wear by checking, adjusting, and lubricating the chain.

Fast Chain Adjustment Method and Steps

How to use a bush or shim for fast chain adjustment and the steps involved.

Chain, Sprocket, and Pinion Wear Check

Chain Wear Check Procedure

Steps to check chain wear by measuring a specific length.

Chain Lubrication and Guide Maintenance

Front Wheel Removal

Front Wheel Reassembly

Rear Wheel and Tyre Maintenance

Brake Pad Maintenance

Brake Pad Cleaning and Installation

Brake Fluid Change

Brake Fluid Replacement Steps

Front Braking System Bleeding

Rear Braking System Bleeding

Battery Maintenance and Safety

SWM SM 500 R E4 2018 Specifications

General IconGeneral
CategoryEnduro
Engine TypeSingle cylinder, 4-stroke
Compression Ratio12.5:1
IgnitionElectronic
StartingElectric
Transmission6-speed
Final DriveChain
Front BrakeSingle disc
Rear BrakeSingle disc
Front Tire90/90-21
Rear Tire140/80-18
Ground Clearance300 mm
Fuel SystemFuel injection
Rear SuspensionMonoshock
Fuel Capacity7.2 l
Cooling systemLiquid

Related product manuals