Need help?Do you have a question about the SWP ARC120 and is the answer not in the manual?
Precautions against electrical hazards during operation.
Safety measures for welding fumes and gases.
Protection required from welding arc light.
Preventing fires caused by welding sparks.
Advice on hearing protection during welding.
Guidance on handling equipment malfunctions.
Connecting the primary power supply cable.
Connecting electrode holder and work piece cables.
Operation of the power switch and current meter.
Setting welding current and arc force parameters.
Understanding the O.C. Light for overheat protection.
Switching between TIG and MMA welding modes.
Recommendations for installation and operating location.
Essential safety advice for operation and maintenance.
Diagnosing issues with no output and fan inactivity.
Troubleshooting intermittent halts and no output.
Addressing problems with no output but fan operating.
Resolving issues when the O.C. light indicates a fault.
To Next Page
General