External Effects Unit
MODE DIAGRAM 5
FRONT END: Single Channel Mode
POWER AMP: Bridged/Mono Mode
SPEAKER CABINETS: One
SIGNALS TO CONSOLE: One (with external effects unit)
MD5
= BRIDGE/MONO MODE
= STEREO MODE
External Power Amp
(If desired)
Mixing
Console
Speaker
Cabinet
Please Note:
The minimum load that the Mo’ Bass
can drive in Bridge/Mono Mode is
4 ohms total. This means that you
can connect one 4 ohm enclosure or
two 8 ohm enclosures in parallel.
Left Out
Right Out
Mono In
To Next Page
Loading...
